Network configuration

Setting a static IP address. Do this from the console, because the SSH session is lost when the address changes (reconnect after change of the IP is possible, but there is a risc of cut off yourself). Replace the example addresses with your own.

set ietf-interfaces:interfaces/interface[name='br0']/ietf-ip:ipv4/czechlight-network:dhcp-client/czechlight-network:enabled false
set ietf-interfaces:interfaces/interface[name='br0']/ietf-ip:ipv4/ietf-ip:address[ip='NEW_IP']/ietf-ip:prefix-length 24
set ietf-routing:routing/control-plane-protocols/control-plane-protocol[type=ietf-routing:static][name='static']/static-routes/ietf-ipv4-unicast-routing:ipv4/ietf-ipv4-unicast-routing:route[destination-prefix='0.0.0.0/0']/ietf-ipv4-unicast-routing:next-hop/ietf-ipv4-unicast-routing:outgoing-interface br0
set ietf-routing:routing/control-plane-protocols/control-plane-protocol[type=ietf-routing:static][name='static']/static-routes/ietf-ipv4-unicast-routing:ipv4/ietf-ipv4-unicast-routing:route[destination-prefix='0.0.0.0/0']/ietf-ipv4-unicast-routing:next-hop/ietf-ipv4-unicast-routing:next-hop-address "NEW_DEFGW_IP"
commit
copy running startup

Check the result:

get /ietf-interfaces:interfaces/interface[name='br0']/
get /ietf-system:system